BEECOMIST SYSTEMS INC -- PRO-FLUSH  -- 6840-00N024077
<pre>=====================  Product Identification  =====================

Product ID:PRO-FLUSH
MSDS Date:11/24/1993
FSC:6840
NIIN:00N024077
=== Responsible Party ===
Company Name:BEECOMIST SYSTEMS INC
Address:3255 MEETINGHOUSE ROAD
City:TELFORD
State:PA
ZIP:18969
Country:US
Info Phone Num:215-721-9424
Emergency Phone Num:215-721-9424
CAGE:65387
=== Contractor Identification ===
Company Name:BEECOMIST SYSTEMS INC
Address:31 MEETINGHOUSE RD
Box:City:TELFORD
State:PA
ZIP:18969
Country:US
Phone:215-724-9424
CAGE:65387

=============  Composition/Information on Ingredients  =============

Ingred Name:MINERAL SPIRITS; (SYNTHETIC ISOPARAFFINIC HYDROCARBON
    BLEND)
CAS:64475-85-0
RTECS #:PY8240000
Fraction by Wt: >50%
OSHA PEL:300 PPM (MFR)
ACGIH TLV:300 PPM (MFR)

Ingred Name:ETHYL ALCOHOL; (ETHANOL)
CAS:64-17-5
RTECS #:KQ6300000
Fraction by Wt: <40%
OSHA PEL:1000 PPM
ACGIH TLV:1000 PPM

Ingred Name:METHANOL (SARA 313) (CERCLA)
CAS:67-56-1
RTECS #:PC1400000
Fraction by Wt: <2%
OSHA PEL:S, 200 PPM
ACGIH TLV:S, 200 PPM/250 STEL
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:2-PENTANONE, 4-METHYL-; (METHYL ISOBUTYL KETONE) (SARA 313)
    (CERCLA)
CAS:108-10-1
RTECS #:SA9275000
Fraction by Wt: <0.9%
OSHA PEL:100 PPM
ACGIH TLV:50 PPM/75 STEL
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:SPILL PROC: PROPER, LEGAL DISP. ADVISE APPROP AGENCY(S), IF
    REQD. AQUATIC TOX: NON WATER SOL (ISOPARAFFINIC) (ING 6)
RTECS #:9999999ZZ

Ingred Name:ING 5: PORTION OF PROD WOULD FLOAT ON TOP OF WATER & SLOWLY
    EVAP. LG AMT COULD PVNT AIR FROM CONTACTING WATER (ING 7)
RTECS #:9999999ZZ

Ingred Name:ING 6: & STOP EXCHANGES OF OXYG. WATER SOL PORTION IS
    BIODEGRADABLE. LG AMTS IN WATER WOULD BE EXPECTED TO HAVE (ING 8)
RTECS #:9999999ZZ

Ingred Name:ING 7: HIGH B.O.D. PROD IS NOT LIKELY TO AFFECT AQUATIC
    BIOTA/WASTE TREATMENT MICROBES.
RTECS #:9999999ZZ

Ingred Name:PROT GLOVES: OR NITRILE GLOVES.
RTECS #:9999999ZZ

Ingred Name:OTHER PROT EQUIP: THEN LAUNDER CLOTHING BEFORE REUSE.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: CONT W/VAP OR LIQ MAY
    IRRITATE EYES, NOSE & THROAT. MAY CAUSE HEADACHE, DROWSINESS,
    NARCOSIS OR DEATH, IF INHAL EXPOSURE IS HEAVY AND FOR LONG PERIOD
    OF TIME. SKIN: WILL REMOVE OILS FROM  SKIN & DRY SKIN. EYES: MAY
    CAUSE BURNING AND IRRITATION. INGESTION: HARMFUL OR FATAL, IF
    SWALLOWED. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: MAY CAUSE BLINDNESS, IF SWALLOWED.
    PULMONARY ASPIRATION HAZARD, IF SWALLOWED AND OR VOMITING OCCURS
    BECAUSE PRODUCT MAY ENTER AND DAMAGE LUNGS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHAL: MOVE TO FRESH AIR. IF BRTHG IS DFCLT, GIVE OXYG & CALL
    A PHYS. SKIN: WASH WELL W/SOAP & WATER UNTIL ALL ODOR IS GONE. IF
    IRRIT DEVELOPS, SEE PHYS. REMOVE PROD FROM CLTHG BY ALLOWING TO DRY
    IN O PEN AIR THEN LAUNDER BEFORE WEARING AGAIN. EYES: FLUSH
    W/PLENTY OF WATER FOR @ LST 15 MINS. SEEK MED MD, IF SYMPS PERSIST.
    INGEST: POISONOUS. IF SWALLOWED, DO NOT INDUCE VOMIT. DO NOT GIVE
    (SUPDAT)

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:41.0F,5.0C
Lower Limits:0.6%
Upper Limits:20%
Extinguishing Media:WATER FOG, CARBON DIOXIDE, CHEMICAL FOAM, DRY
    CHEMICAL POWDER.
Fire Fighting Procedures:USE NIOSH APPRVD SCBA & FULL PROT EQUIP . USE
    WATER SPRAY TO COOL SURFS THAT ARE EXPOS TO FIRE. WATER MAY NOT
    CONTROL FIRE. USE CHEM FOAM, DRY (SUPDAT)
Unusual Fire/Explosion Hazard:VAPORS ARE HEAVIER THAN AIR. THEY MAY
    TRAVEL CONSIDERABLE DISTANCE TO SOURCE OF IGNITION AND THEN FLASH
    BACK.

==================  Accidental Release Measures  ==================

Spill Release Procedures:CNTN SPILL. ELIM IGNIT SOURCES. KEEP FROM
    DRAINS, SEWERS & NATURAL BODIES OF WATER. ABSORB ON INERT, SOLV
    ABSORBING MATL SUCH AS FULLERS EARTH, SAWDUST/SAND. PLACE IN STEEL
    CNTNRS & HNDLD AS FLAMM SOL V. HAVE EPA APPRVD DISP SERVICE CARRY
    OUT (ING 5)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINERS CLOSED. STORE IN COOL,
    VENTILATED DRY PLACE. KEEP AWAY FROM SOURCES OF IGNITION. STORE
    ONLY IN STEEL CONTAINER.
Other Precautions:USE SPARK RESISTANT TOOLS. GROUND CONTAINER BEFORE
    OPENING AND TRANSFERRING PRODUCT. DO NOT SIPHON BY MOUTH.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR NIOSH APPVD RESPIRATORY PROTECTION, IF VAP
    IN AIR EXCEEDS EXPOS LIMIT OR IF YOU FIND EXPOSURE TO BE
    IRRITATING.
Ventilation:PROVIDE SUFFICIENT VENTILATION TO MEET PROUDCT VAPOR
    EXPOSURE LIMIT.
Protective Gloves:SOLV-RESIST COATING SUCH AS VINYL(ING 9)
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER . IF
    CONT MAY OCCUR, WEAR GEAR W/SOLV RESIST COATING. AIR DRY & (ING 10)
Work Hygienic Practices:WASH WITH SOAP AND WATER AFTER HANDLING.
Supplemental Safety and Health
FIRE FIGHT PROC: CHEM POWDER/CARBON DIOXIDE, IF WATER WILL NOT CONTROL
    FIRE. FIRST AID PROC: LIQUIDS. SEE MED MD IMMED. IF SM AMT ENTERS
    MOUTH BUT IS NOT SWALLOWED, RINSE MOUTH W/WATER & SPIT OUT RINS
    E-WATER. REPEAT UNTIL ALL TASTE OF PRODIS GONE. DO NOT SWALLOW
    UNTIL ALL TASTE OF PROD IS GONE.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>148F,>64C
Vapor Pres:<55 @ 25C
Vapor Density:>1.5
Spec Gravity:0.77 (WATER =1)
Evaporation Rate &amp; Reference:NOT KNOWN
Solubility in Water:<50%
Appearance and Odor:COLORLESS LIQUID, ALCOHOL ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE AND ASPHYXIANTS FROM
    COMBUSTION.

====================  Disposal Considerations  ====================

Waste Disposal Methods:FOLLOW ALL REGULATIONS - FEDERAL, STATE AND
    LOCAL. DO NOT FLUSH TO DRAINS, SEWERS OR NATURAL BODIES OF WATER.
    IF POSSIBLE, RECYCLE. IF RECYCLING IS NOT POSSIBLE, THEN CONTACT TO
    AUTHORIZED DISPOSAL SE RVICE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.