EVR-GARD COATINGS CO -- AQUA-SHEEN ACRYLIC SATIN ENAMEL, 4200  -- 8010-00N063536
<pre>=====================  Product Identification  =====================

Product ID:AQUA-SHEEN ACRYLIC SATIN ENAMEL, 4200
MSDS Date:06/04/1991
FSC:8010
NIIN:00N063536
=== Responsible Party ===
Company Name:EVR-GARD COATINGS CO
Address:16400 GARFIELD AVE
City:PARAMOUNT
State:CA
ZIP:90723
Country:US
Info Phone Num:213-531-0131
Emergency Phone Num:310-531-0131
CAGE:5G582
=== Contractor Identification ===
Company Name:EVR-GARD COATINGS CO
Address:16400 GARFIELD AVE
Box:City:PARAMOUNT
State:CA
ZIP:90723
Country:US
Phone:310-531-0131
CAGE:5G582

=============  Composition/Information on Ingredients  =============

Ingred Name:ETHYLENE GLYCOL; (502 ETHYLNE GLYCOL) (1,2-ETHANEDIOL)
    (SARA 313) (CERCLA) VP: 0.1 @ 68F
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: 2.62%
OSHA PEL:50 PPM (MFR)
ACGIH TLV:C 50 PPM, VAPOR
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:VOLATILE ORGANIC CONTENT (COATING): 1.23 LB/GL (148 G/L)
RTECS #:9999999VO
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION: MAY CAUSE HEADACHE
    AND NAUSEA, DIZZINESS. SKIN/EYES CONTACT/SKIN ABSORPTION: PRIMARILY
    AN IRRITANT. REDNESS OR RASH ON SKIN. INGESTION: NAUSEA, DIZZINESS,
    HEADACHES. CHRONIC: NONE S PECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH WITH CLEAN WATER
    FOR AT LEAST 15 MINUTES. SKIN: REMOVE SATURATED CLOTHING AND WASH
    SKIN WITH SOAPY WATER THOROUGHLY. INGESTION: INDUCE VOMITING WITH 1
    OZ O F SYRUP OF IPECAC FOLLOWED IN 5 MINUTESWITH A GLASS OF WATER.
    CALL MD.

=====================  Fire Fighting Measures  =====================

Flash Point:241F,116C
Lower Limits:3.2%
Upper Limits:15.3%
Extinguishing Media:USE FOAM, ALCOHOL FOAM, CARBON DIOXIDE, DRY
    CHEMICAL, WATER FOG.
Fire Fighting Procedures:THIS IS A WATER-BASED PRODUCT. WILL NOT
    SUPPORT COMBUSTION. WEAR NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB SPILL WITH ANY ABSORBENT MATERIAL
    (SAWDUST, SAND, CLAYS, ETC), AND FLUSH SPILL AREA WITH LOTS OF
    WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:THIS PRODUCT IS STABLE UNDER NORMAL
    USE AND STORAGE CONDITIONS. KEEP OUT OF REACH OF CHILDREN. KEEP
    FROM FREEZING.
Other Precautions:KEEP FROM FREEZING. DO NOT TAKE INERNALLY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:THE USE OF NIOSH/MSHA APPROVED MASKS DURING
    APPLICATION TO AVOID EXCESSIVE INHALATION OF VAPORS IS HIGHLY
    RECOMMENDED. OPEN WINDOWS AND DOORS OR USE OTHER MEANS TO INSURE
    FRESH AIR ENTRY DURING APPLIC ATION AND DRYING.
Ventilation:PROVIDE ADEQ VENT AT ALL TIMES DURING HANDLING &
    APPLICATION OF THIS PROD. INSURE ADEQ SUPPLY OF FRESH AIR AT ALL
    TIMES.
Protective Gloves:BUNA N.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:WEAR MASKS & GLOVES IF NEC TO PVNT PRLNG
    CONT W/THE MATERIAL. ANSI APPRVD EMER EYEWASH & DELUGE SHOWER .
Work Hygienic Practices:OBSERVE STANDARD HYGIENIC PRACTICES WHEN
    HANDLING THIS PRODUCT.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:387F,197C
Vapor Pres:SEE ING 1
Vapor Density:HVR/AIR
Spec Gravity:1.3 (H*2O=1)
Evaporation Rate &amp; Reference:SLOWER THAN ETHER
Solubility in Water:DILUTABLE
Appearance and Odor:WHITE PAINT & COLORS, WITH SLIGHT AMMONIA SMELL

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND ALKALIS AND MATERIALS THAT REACT WITH WATER.
Stability Condition to Avoid:DO NOT STORE IN HIGH TEMPERATURE AREAS.
Hazardous Decomposition Products:NONE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:PLACE ALL HAZARDOUS WASTE, INCLUDING ABSORBENTS
    USED FOR SPILLS, IN 55 GAL METAL DRUMS AND DISPOSE IN APPROVED
    DUMPSITE IN ACCORDANCE WITH PRESCRIBED FEDERAL, STATE, AND LOCAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.